ASME A90.1-2015 pdf download – Safety Standard for Belt Manlifts
ASME A90.1-2015 pdf download – Safety Standard for Belt Manlifts. 4.4 Hoods on Underside of Floor Openings 4.4.1 Fixed Type. On the up-side of the manlift floor, openings shall be provided with an underfloor hood meeting the following requirements (see Fig. 5): (a) Slope. The...
ASME A18.1-2014 pdf download – Safety Standard for Platform Liftsand Stairway Chairlifts
ASME A18.1-2014 pdf download – Safety Standard for Platform Liftsand Stairway Chairlifts. overhead structure: all of the structural members supporting the machinery, sheaves, and equipment at the top of the runway. penetrate a floor: pass through or pierce a floor in such a way that...
ASME A17.4-2015 pdf download – Guide for Emergency Personnel
ASME A17.4-2015 pdf download – Guide for Emergency Personnel. (1) The mainline disconnect switches in the machine room for the stalled elevator and the adjacent elevators (if the stalled elevator car is located in a multiple hoistway) should be set in the “OFF” position. Lockout/tagout...
ASME B107.100-2010 pdf download – Flat Wrenches
ASME B107.100-2010 pdf download – Flat Wrenches. 4.6.2 Coatings. The coating shall be adherent, smooth, continuous, and free from uncoated areas, pits, blisters, nodules, and any other conditions that would interfere with their protective value and serviceability. Plating contact marks should be kept to a...
ASME A112.18.9-2011 pdf download – Protectors/lnsulators for Exposed Wasteand Supplies on Accessible Fixtures
ASME A112.18.9-2011 pdf download – Protectors/lnsulators for Exposed Wasteand Supplies on Accessible Fixtures. 4.4 Water Resistance Protectors/insulators for exposed waste and supplies shall meet the water resistance requirements contained in para. 5.3. 4.5 Fungus Growth Resistance Protectors/insulators for exposed water supply and drainpipes shall conform...
ASME A112.14.6-2010 pdf download – FOG (Fats, Oils,and Greases)Disposal Systems
ASME A112.14.6-2010 pdf download – FOG (Fats, Oils,and Greases)Disposal Systems. (d) all safety and health-related instructions (e) all wiring instructions to reference national or local codes (f) all clean-out locations (g) all instructions that show the clearances required for maintenance, cleaning, and prevention of hazards...
ASME A112.6.7-2010 pdf download – Sanitary Floor Sinks
ASME A112.6.7-2010 pdf download – Sanitary Floor Sinks. 2.2.1 Surface Epoxy. The surface epoxy, visible after installation, shall be glossy to the extent that it will have a 60 deg (1.05 rad) specular gloss of not less than 60 when tested in accordance with para....
ASME A17.6-2010 pdf download – Standard for Elevator Suspension, Compensation, and Governor Systems
ASME A17.6-2010 pdf download – Standard for Elevator Suspension, Compensation, and Governor Systems. Part 1 covers the general requirements for the more common types of stranded steel wire ropes for hoisting, compensation, and governor applications on passenger or freight elevators. Included in the scope of...
ASME B30.26-2010 pdf download – Rigging Hardware
ASME B30.26-2010 pdf download – Rigging Hardware. SECTiON 26-1.1: TYPES AND MATERIALS 26-1.1.1 Types (a) Body types covered are anchor, chain, and synthetic sling (see Fig. 26-1.1.1-I). (b) Pin types covered are screw pin and bolt type (see Fig. 26—1.1.1—1). (c) Shackles other than those...
ASME B30.9-2010 pdf download – slings Safety Standard for Cableways, Cranes,Derricks, Hoists, Hooks, Jacks, and Slings
ASME B30.9-2010 pdf download – slings Safety Standard for Cableways, Cranes,Derricks, Hoists, Hooks, Jacks, and Slings. spiral: a single transverse coil that is the basic element from which metal mesh is fabricated. splice, flemish eye (zvire rope): mechanical splice formed by opening the rope up...