ASME B29.8-2010 pdf download – Leaf Chains,Clevises, and Sheaves
ASME B29.8-2010 pdf download – Leaf Chains,Clevises, and Sheaves. 1.4 General Chain Dimensions for Interchangeability The dimensions given in Tables I and 2 provide guidance that will ensure interchangeability and compatibility with standard design devises. It is recommended that these dimensions be considered for actual...
ASME B18.18.2-2009 pdf download – lnspection and Quality Assurance for High-Volume Machine Assembly Fasteners
ASME B18.18.2-2009 pdf download – lnspection and Quality Assurance for High-Volume Machine Assembly Fasteners. If a documented, verifiable, statistically based in-process inspection system is used by the fastener manufacturer, inspection sample sizes and reporting shall be in accordance with specified quality systems such as ASME,...
ASME A112.1016-2011 pdf download – Performance requirements for automatic compensating valves forindividual showers and tub/showercombinations
ASME A112.1016-2011 pdf download – Performance requirements for automatic compensating valves forindividual showers and tub/showercombinations. (e) Adjust valve V3 so that the device delivers 9.5 ± 1 .0 L/min (2.5 ± 0.3 gpm) and maintain the conditions established in Items (b) to (d) or, if...
ASME A112.19.17-2010 pdf download – Manufactured SafetyVacuum Release Systems (SVRS) forResidential and Commercial SwimmingPool, Spa, Hot Tub,and Wading PoolSuction Systems
ASME A112.19.17-2010 pdf download – Manufactured SafetyVacuum Release Systems (SVRS) forResidential and Commercial SwimmingPool, Spa, Hot Tub,and Wading PoolSuction Systems. 3 TESTING 3.1 GeneraL 3.1.1 Purpose. The purpose of these tests is to establish proper device application criteria, i.e., flooded suction and/or suction lift applications,...
ASME A112.19.5-2011 pdf download – Flush valves and spuds for water closets, urinals, and tanks
ASME A112.19.5-2011 pdf download – Flush valves and spuds for water closets, urinals, and tanks. S Performance requirements and test methods 51 General 5.1.1 Precondltioning Before testing, specimens shall be conditioned at ambient laboratoy conditions for a minimum of 12 h. 5.1.2 Installation for testing...
ASME B16.40-2013 pdf download – Manually Operated Thermoplastic Gas Shutoffs and Valvesin Gas Distribution Systems
ASME B16.40-2013 pdf download – Manually Operated Thermoplastic Gas Shutoffs and Valvesin Gas Distribution Systems. The method of test is as follows. A closed valve shall be cooled to a temperature of —20°F ± 5°F (—29°C ± 3°C) and held there for an 18-hr minimum....
ASME B16.49-2012 pdf download – Factory-Made,Wrought Steel, Buttwelding lnduction Bends for Transportation and Distribution Systems
ASME B16.49-2012 pdf download – Factory-Made,Wrought Steel, Buttwelding lnduction Bends for Transportation and Distribution Systems. nPPenlux 1L o1oiVI 6.1.3 The longitudinal weld seam should belocated on the neutral axis (p = 0 deg or 180 deg in Fig. 1).When this is not possible, the weld...
ASME B16.51-2013 pdf download – Copper and Copper Alloy Press-Connect Pressure Fittings
ASME B16.51-2013 pdf download – Copper and Copper Alloy Press-Connect Pressure Fittings. 9,3 Inside Diameter of Fitting The minimum cross-sectional area of the inside diameter through the fitting body shall not be less than the theoretical minimum area defined by diameter 0 in Table I...
ASME B16.14-2013 pdf download – Ferrous Pipe Plugs,Bushings, and Locknuts With Pipe Threads
ASME B16.14-2013 pdf download – Ferrous Pipe Plugs,Bushings, and Locknuts With Pipe Threads. (b) The chemical and mechanical properties of cast material shall equal or exceed those properties listed in ASTM A126, as applicable. Steel castings, forgings, or machined bar properties shall correspond to the...
ASME B18.2.1-2012 pdf download – Square, Hex, Heavy Hex, and Askew HeadBolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series)
ASME B18.2.1-2012 pdf download – Square, Hex, Heavy Hex, and Askew HeadBolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series). 2.4 Points Unless otherwise specified, bolts need not be pointed. Products designated as screws, with the exception of lag screws,...